Scroll Top
Centre Urbain Nord, Imm. Tour des bureaux 2ème étage – B01, Tunis
+216 29 764 497
commercial@tunisia-building-partners.com

Gas Equipment

GAS EQUIPMENT

TBP offer a wide range of gas equipment materials : 

VALVES FOR GAS CYLINDER

ADVANTAGES:

  • There is a square in the valve of gas cylinder that facilitate the use of a key for the assembly and disassembly of the valve on the LPG bottle.
  • No risk of flywheel disassembly due to a brass stopper (square pin).
  • Each valve is tested in internal / external tightness test at a pressure of 0.1 bars and 30 bars (According to the EN ISO 15995 standard).
  • In each valve, there is a self-tightening joint for more safety in the case of loosening of the regulator.
  • In each valve, there is a flow restrictor to limit the escape of gas in case of an accident (breakage of the body).
  • Two O-rings on the piston to avoid any risk of leakage.
  • Each valve is marked with the month and year of manufacture. This ensures perfect traceability over time.
  • For each lot of manufactured valve, standard tests are applied (according to the EN ISO 15995 standard).
gas equipment

CAMPING GAS VALVE

ADVANTAGES:

  • There is a square in the camping gas valve that facilitate the use of a key for the assembly and disassembly of the valve on the LPG bottle.
  • No risk of the disassembly of the cage due to the crimping force.
  • Each valve is tested in internal / external tightness test at a pressure of 0.1 bar and 30 bar (According to standard EN ISO 14245).
  • In each valve there is an anti-leakage seal for more safety in case of loosening of the regulator.
  • Each valve is marked with the month and year of manufacture. This ensures perfect traceability over time.
  • For each lot of manufactured automatic valve, standard tests are applied (according to standard EN ISO 14245).

FITTINGS FOR GAS CONNECTION

Fitting for gas connection is a safety standard that ensures that gas connections are made safely and correctly. It also ensures that there are no leaks in the system, and that the system is safe to use.

The fitting for gas connection involves many aspects such as:

  • Installation of a new meter and valve, if necessary
  • Connection between gas supply and electric supply lines
  • Connection between gas service and water service lines

TAPS FOR GAS CONNECTION

A gas tap, or gas valve, is a device that controls the flow of gas through a pipe from its supply source.